SBA Proposed Size Standards 2026: NAICS & Competitive Impact
A competitor does not need to hire another employee or win another contract to become more relevant to your pipeline. A change in the rules defining “small” could bring that company into a market it could not previously enter.
The Small Business Administration (SBA) has proposed new size standards that would redefine small business eligibility for federal contracts, affecting 338 industry groups. This proposal shifts from six-digit NAICS industries to a combination of four- and five-digit classifications, altering measurement bases and thresholds. These changes could significantly impact a company's competitive landscape by modifying who qualifies as a small business. Comments on the SBA's proposed size standards and revised methodology are due by November 20, 2026.
For a growing contractor, the same change might create more room to pursue small-business work. The effect depends on your industry, target contracts, and the companies competing for them.
As of November 17, 2026, comments on SBA’s proposed size standards and revised methodology are due November 20, 2026, according to the official extension notice. The proposal addresses 338 industry groups and industries.
These are proposals, not new standards to apply today. They are worth examining now because your competitive planning should look beyond whether your own business remains eligible.
What would SBA’s proposed size standards change?
The August 20 proposed rule would move size standards from six-digit NAICS industries to a combination of four- and five-digit classifications, while changing the measurement basis for many industries and proposing different thresholds.
The accompanying revised methodology explains how SBA developed the proposed standards. Together, the documents require more attention than a quick search for a larger dollar amount.
For your comparison, check the classification, whether size would be measured by receipts or employees, and the proposed limit. Do not assume that the proposed treatment of one industry tells you what would happen in another.
The proposal also does not mean SBA has replaced the entire NAICS classification system. It concerns how SBA would establish size standards using broader industry groupings.
How should you start with NAICS codes for government contracting work?
To start with NAICS codes for government contracting work, begin by pulling several recent solicitations, awards, and upcoming targets from your actual pipeline. Record the NAICS codes and size standards attached to that work, including relevant categories or orders under multiple-award contracts. Your company’s primary NAICS code is a starting point, but it may not cover everything you sell to government. Under 13 CFR 121.402, the solicitation’s assigned NAICS code and corresponding size standard matter for procurement eligibility. You cannot make a size issue disappear by adding a more convenient code to your company profile. For each target, compare the applicable current standard with the proposed treatment. Trace the six-digit code to the relevant proposed grouping using the industry descriptions and tables, then record the source page and measurement unit. A dollar threshold and an employee limit cannot be compared as though they measure the same thing. Use the current size regulations, check relevant exceptions, and follow the applicable calculation rules, including affiliation where required. Keep the two versions clearly labeled. Your planning file can model a proposed standard, but current representations must follow the applicable rules in force. If a final rule is issued, examine its effective date and implementation provisions before taking action.
Pull several recent solicitations, awards, and upcoming targets from your actual pipeline. Record the NAICS codes and size standards attached to that work, including relevant categories or orders under multiple-award contracts.
Under 13 CFR 121.402, the solicitation’s assigned NAICS code and corresponding size standard matter for procurement eligibility. You cannot make a size issue disappear by adding a more convenient code to your company profile.
For each target, compare the applicable current standard with the proposed treatment. Trace the six-digit code to the relevant proposed grouping using the industry descriptions and tables, then record the source page and measurement unit. A dollar threshold and an employee limit cannot be compared as though they measure the same thing.
Use the current size regulations, check relevant exceptions, and follow the applicable calculation rules, including affiliation where required.
Keep the two versions clearly labeled. Your planning file can model a proposed standard, but current representations must follow the applicable rules in force. If a final rule is issued, examine its effective date and implementation provisions before taking action.
Who else could enter your market due to SBA size standard changes?
A higher threshold may give a growing business more room before it exceeds a size limit, while also allowing additional firms to compete for work restricted to small businesses.
Those possibilities can exist at the same time, which is why “good news” or “bad news” is usually too broad a conclusion.
Imagine a contractor pursuing regional IT support work. A company that currently competes primarily for unrestricted awards might become a potential set-aside competitor under a revised standard. Whether it would actually pursue the same contracts would still depend on geography, contract size, customer relationships, qualifications, and business interest.
Review award history for the offices you target. Which companies already perform similar work? Which operate at the scale your buyers purchase? Which appear positioned to pursue the same requirements?
Public award data helps identify research candidates; it does not prove a competitor’s current receipts, employee count, affiliation, or size status. Treat your findings as a planning assessment rather than an eligibility determination.
How might SBA size standard changes affect your teaming assumptions?
SBA size standard changes could affect your teaming assumptions by altering how you view potential partners. For example, a company previously seen as a prime-contractor prospect might become a more direct competitor in some markets, while another might remain a valuable partner due to its location, specialty, or customer experience. It's important to map the relationship around the work instead of relying on a permanent “prime” or “sub” label. Do not assume a proposed threshold automatically qualifies a partner for a particular subcontracting role, joint venture, or socioeconomic set-aside. Always verify the applicable requirements, remembering that size is only one part of eligibility.
A company you previously viewed mainly as a prime-contractor prospect might become a more direct competitor in some markets. Another might remain a valuable partner because it brings a location, specialty, or customer experience your team needs.
Map the relationship around the work instead of relying on a permanent “prime” or “sub” label.
Do not assume a proposed threshold automatically qualifies a partner for a particular subcontracting role, joint venture, or socioeconomic set-aside. Verify the applicable requirements, and remember that size is only one part of eligibility.
How can you use a NAICS comparison worksheet for SBA size standards?
You can use a NAICS comparison worksheet for SBA size standards by completing one copy for each code relevant to your pipeline. This helps you organize and compare current and proposed standards. For each worksheet, record the following: NAICS and target work (Code, industry title, buyer, and representative solicitation or contract), Current standard (Threshold, measurement basis, applicable exception, and official source), Proposed treatment (Proposed grouping, threshold, measurement basis, and source page or table), Your business position (Relevant size calculations and questions requiring specialist review), Likely business effect (Possible growth capacity, competitive exposure, or no material change), Teaming implications (Relationships worth investigating and eligibility questions to verify), Supporting evidence (Award references, geographic scope, bid experience, and permissible business data), and Next action (Research task, comment topic, responsible person, and completion date). Remember to keep official requirements separate from your business assumptions so someone reviewing the worksheet can follow your reasoning. Finish with a short explanation of the likely effect on your business; identifying the buyer, type of work, and evidence behind any concern makes the analysis useful.
| Worksheet field | What to record |
|---|---|
| NAICS and target work | Code, industry title, buyer, and representative solicitation or contract |
| Current standard | Threshold, measurement basis, applicable exception, and official source |
| Proposed treatment | Proposed grouping, threshold, measurement basis, and source page or table |
| Your business position | Relevant size calculations and questions requiring specialist review |
| Likely business effect | Possible growth capacity, competitive exposure, or no material change |
| Teaming implications | Relationships worth investigating and eligibility questions to verify |
| Supporting evidence | Award references, geographic scope, bid experience, and permissible business data |
| Next action | Research task, comment topic, responsible person, and completion date |
Finish with a short explanation of the likely effect on your business. “More competition” is a starting point; identifying the buyer, type of work, and evidence behind that concern makes the analysis useful.
How should you submit a comment on SBA size standards that explains your business?
If you choose to comment, give SBA a clear connection between the proposed treatment and the market in which you compete.
Identify your applicable NAICS code, the proposed provision, and the business effect you expect. Describe the customers, geographic market, staffing needs, or contract sizes that support your assessment, using information you are authorized to disclose.
A practical structure is:
“Our business performs [work] under NAICS [code] for [customer types]. The proposed [threshold, grouping, or measurement change] could affect us by [specific effect]. Our supporting evidence is [data or experience]. We recommend [specific alternative or clarification] because [reason].”
Explain your assumptions and distinguish observed facts from forecasts. A recommendation grounded in your market gives the agency something more concrete to consider than a prediction that every contractor will benefit or suffer.
The submission instructions identify SBA-2026-0199 for the size-standards proposal and SBA-2026-0265 for the methodology. Use the appropriate docket through Regulations.gov, follow its instructions, and save your confirmation.
Comments are generally public. Follow the notice’s separate instructions for confidential business information rather than uploading sensitive material into a public comment.
How can you turn your SBA size standard review into a better-informed pipeline?
You can turn your SBA size standard review into a better-informed pipeline by leveraging tools like FedBiz365, which helps contractors research awards, buyers, competitors, and potential teaming partners. This context allows you to investigate which parts of your pipeline deserve closer attention under a proposed change. Additionally, FedBiz Access provides certification assistance to help businesses approach eligibility and documentation questions with a clearer plan. Market intelligence supports business decisions; formal size questions may require guidance from SBA or qualified counsel. Before November 20, prioritize the NAICS codes tied to your most important customers, complete the comparison, and decide whether you have business-specific evidence worth submitting. Call FedBiz Access today at 844-628-8914 or book a quick call at your convenience to discuss your market research and certification-planning needs.
FedBiz Access also provides certification assistance to help businesses approach eligibility and documentation questions with a clearer plan. Market intelligence supports business decisions; formal size questions may require guidance from SBA or qualified counsel.
Before November 20, prioritize the NAICS codes tied to your most important customers, complete the comparison, and decide whether you have business-specific evidence worth submitting.
Call FedBiz Access today at 844-628-8914 or book a quick call at your convenience to discuss your market research and certification-planning needs.
Frequently Asked Questions
- 1 What are the key changes proposed by the SBA regarding size standards for 2026?
-
The August 20 proposed rule would shift size standards from six-digit NAICS industries to a mix of four- and five-digit classifications. It also proposes changes to the measurement basis (receipts or employees) and different thresholds for many industries. These are proposals for future standards, not current rules.
- 2 How could the proposed SBA size standards impact my company's competitive landscape?
-
Changes in size standards could allow previously ineligible companies to enter markets you compete in, or create more opportunities for your growing business in small-business work. The specific effect depends on your industry, target contracts, and current competitors. It's important to assess how these changes might affect both your eligibility and that of your competitors.
- 3 When is the deadline to submit comments on the SBA's proposed size standards?
-
According to the official extension notice, comments on SBA’s proposed size standards and revised methodology are due by November 20, 2026. This deadline is crucial for businesses to provide feedback on the potential changes.
- 4 How should I check my NAICS codes in light of the proposed changes?
-
While your company's primary NAICS code is a starting point, you should pull recent solicitations, awards, and upcoming targets from your pipeline. Record all NAICS codes and associated size standards for that work, including categories under multiple-award contracts, to understand the full scope of potential impact.








